Today we worked some more on the car, luckily this time we made more progress and we didn’t have too much setbacks like last time. At around 10:00 Kel @ Ape garage arrived to start working on the car. But first i forced him to look at my new Motordrive seat, which i collected last week when i was in the UK. Allan & Mel @ Motordrive did a great job making me a custom seat with my own embroidery in the headrest. The seat is made out of a Kevlar / Carbon hybrid material. With an outer layer of Carbon to match the different parts on my car.
Some pictures of the seat (please note it’s not properly fitted yet):
More on the Motordrive seats will follow shortly as i became Distributer of their range for the Netherlands. After we Picked up the Clutch @ Jochem we started pre assembling the Engine to be Mounted in the car. We received loads of parts from Bas @ K-tuned as the first dealer of K Tuned in the Netherlands (many thnxs!), so we had our work cut our for today. The parts we mounted:
- R-developments lightweight flywheel
- Helix stage 3 Clutch and uprated pressure plate
- R-developments modified RBC manifold with 70mm R-developments Throttle body
- K Tuned Waterpump blockoff plate (for the electric waterpump)
- K Tuned Upper filler neck with Rad cap
- K Tuned Fuel rail with centre fit Fuel pressure gauge
- K tuned coil pack cover
- K Tuned Iacv blockoff plate
- K Tuned Heater hose delete
- R-developments K series engine bolt kit
Program for next time: Gearbox fitting, engine fitting, alligning the drive shafts, install front brakes start and drive 
. More progress soon!
Some pictures:
